|
关注:1
2013-05-23 12:21
求翻译:硬件设计上严格将强弱电分开。弱电部分安装在主板上,所有信号线均经过地线进行屏蔽;强电部分安装在两块底板上,走线短,间距宽。装置的所有外部接线端子的耐压值均可达到3KV是什么意思?![]() ![]() 硬件设计上严格将强弱电分开。弱电部分安装在主板上,所有信号线均经过地线进行屏蔽;强电部分安装在两块底板上,走线短,间距宽。装置的所有外部接线端子的耐压值均可达到3KV
问题补充: |
|
2013-05-23 12:21:38
Strictly separate the strength of electrical hardware design. The weak part installed on the motherboard, all signal lines are shielded ground; strong electric parts installed in the two floor, traces short and wide spacing. Pressure values of all external terminals of the device can reach 3kv
|
|
2013-05-23 12:23:18
正在翻译,请等待...
|
|
2013-05-23 12:24:58
The hardware designs separates strictly strong and the weak electricity.The weak electricity part installs on the motherboard, all holding wires carry on the shield after the grounding; The strong electricity part installs on two ledger walls, walks the line to be short, the spacing is wide.The inst
|
|
2013-05-23 12:26:38
Hardware design of strictly separating the electrical information. Electronic parts installed on the Board, all the signal passes through the ground shield; strong electric parts installed on the two pieces of baseboard, shorter alignment, spacing, width. All external connection terminal of the devi
|
|
2013-05-23 12:28:18
正在翻译,请等待...
|
湖北省互联网违法和不良信息举报平台 | 网上有害信息举报专区 | 电信诈骗举报专区 | 涉历史虚无主义有害信息举报专区 | 涉企侵权举报专区